Kationische Fettungsmittel

Licrol K 4

cationic fatliquor

Chemical composition

blend of natural and synthetic oils

Active matter

approx. 50 %

Appearance

white, viscous emulsion

pH - value (1:10)

3.5 - 4.5

Charge

cationic

Stability

can be used in the chrome tanning. Like vegetable tannins, it precipitates in combination with anionic products

Dilution

1 : 3 with water of 30 °C – 40 °C

Field of application

Cationic fatliquor for the chrome tannage and for the final application into the fatliquoring bath. In rechroming it gives a proper wet back with the natural smooth grain. It supports the uniform uptake of the chrome or the chrome syntan. In topping it provides surface touch for the heavy retan crust, which has to be vacuum dried.

 

Properties

  • good lightfastness
  • improves grain smoothness and elasticity in chrome tannage
  • slightly waxy feel
  • ensures exhaustion of anionic fatliquors
  • improves chrome distribution

     

    Application

    Licrol K 4 is added first in the chrome tanning process. For the exhaustion of the main fatliquor and for surface lubrication, Licrol K 4 is given after the formic acid.

    Acid wash

    Licrol K 4

    0.5 % - 1.0 %

    Chrome tannage

    Licrol K 4

    0.5 % - 2.0 %

    Fatliquoring bath

    Licrol K 4

    1.0 % - 2.0 %

    Top fatliquoring

    Licrol K 4
    Licrol SG
    or
    Licrol K 4
    Licrol SE

    0.5 %
    0.5 %

    0.5 % - 1.0 %
    0.25 % - 0.5 %

    Remark

    Licrol K 4 is a technical emulsion and variations in colour and viscosity can happen. The properties for application are not touched by this.

    Storage temperature

    Storage at temperatures between 5 °C and 40 °C. Precipitates may form if stored below 5 °C. Precipitates can be dissolved in water of 80 °C or higher.

    Shelf life

    Up to 6 months in the original sealed packing.

    Usage

    Stir before use.

    This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.

    Download Technical Data Sheet