Mikrokoll DOS
antifoaming agent for dosing systems
Chemical composition
emulsion of fatty acid esters and additive with low silicon content
Appearance
white liquid
pH - value (1:10)
7.0 - 8.0
Charge
nonionic
Stability
stable to acids, alkalis and salts under usual conditions
Dilution
unlimited soluble in water
Field of application
Used for alkali, acid or neutral liquors in textile processing. In dyeing machines and all apparatuses with high liquor turbulences. In piece dyeing, carpet dyeing and printing or for combating foam in waste water treatment plants.
Properties
- low viscosity
- good dosing
- suitable for dosing systems
- high emulsion stability
Application
In general the dosage of Mikrokoll DOS is between 0.1 – 0.5 g/l. In waste water treatment a dosage of approx. 100 g/m3 of waste water is required.
The dosage depends thereby on the foam producing substance, pH-value, temperature and mechanical equipment.
Remark
Mikrokoll DOS is a technical product and variations in colour and viscosity can happen. The properties for application are not touched by this.
Storage temperature
Storage at temperatures between 5 °C and 40 °C.
Shelf life
Up to 12 months in the original sealed packing.
Usage
Stir before use.
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.