antifoaming agent for dosing systems
emulsion of fatty acid esters and additive with low silicon content
pH - value (1:10)
7.0 - 8.0
stable to acids, alkalis and salts under usual conditions
unlimited soluble in water
Field of application
Used for alkali, acid or neutral liquors in textile processing. In dyeing machines and all apparatuses with high liquor turbulences. In piece dyeing, carpet dyeing and printing or for combating foam in waste water treatment plants.
In general the dosage of Mikrokoll DOS is between 0.1 – 0.5 g/l. In waste water treatment a dosage of approx. 100 g/m3 of waste water is required.
The dosage depends thereby on the foam producing substance, pH-value, temperature and mechanical equipment.
Mikrokoll DOS is a technical product and variations in colour and viscosity can happen. The properties for application are not touched by this.
Storage at temperatures between 5 °C and 40 °C.
Up to 12 months in the original sealed packing.
Stir before use.
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.