blend of organo-modified silicones
pH - value (1:10)
5.0 - 6.0
good solubility in water
Field of application
Ebosoft S-HG is a hydrophilic softener for all types of fibers. It is used for all fabrics made of cotton, viscose, wool and synthetic fibers with the padding or exhaustion process.
Ebosoft S-HG can be diluted with water at any ratio and is applied to the article in the foulard process as well as in the exhaustion process. Ebosoft S-HG can be applied via MA process (Triatex) or via spray process (Weko). For application on the jet equipment we recommend a prior cleaning procedure of the machinery due to its high solubilizing power.
10.0 - 30.0 g/l
depending on the material and the required effect
2.0 - 4.0 % (o.w.f.)
is used in a fresh bath
pH - value
40 - 45 °C
30 - 40 min
Ebosoft S-HG is a technical product and variations in colour and viscosity can happen. The properties for application are not touched by this.
Storage at temperatures between 5 °C and 40 °C. Protect from cold. The product may crystallize upon storage at low temperatures.
Up to 12 months in the original sealed packing.
Stir before use. Stirring and heating up to room temperature dissolves the formed crystals.
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.